BibTex RIS Cite

FABRICATION OF A SCREW-RETAINED HYBRID PROSTHESIS FOLLOWING TREATMENT OF PERI-IMPLANT DEFECTS: A CASE REPORT

Year 2016, Volume: 50 Issue: 3, 57 - 61, 03.10.2016
https://doi.org/10.17096/jiufd.57173

Abstract

The etiology of marginal bone loss around osseointegrated implants is primarily based on the biomechanical and/or microbial factors. If stresses and strains around dental implants under functional loading conditions are expected to exceed the physiologic tolerance thresholds of the alveolar bone, the fixed hybrid prosthesis might be a more reliable treatment of choice instead of fixed metal ceramic restorations. The purpose of this article is to report the 1-year follow-up of the periodontal and prosthetic rehabilitation of a patient who has presented with symptoms of peri-implantitis due to incorrectly planned implant supported fixed metal ceramic bridge which was later replaced with screw-retained hybrid prosthesis following the treatment of peri-implant defects. Treatment helped to maintain patient’s self-confidence and comfort, as well as favorable masticatory function. Rehabilitation with screw retained hybrid prosthesis is an ideal treatment of choice for maxillomandibular skeletal discrepancies.

References

  • van Steenberghe D, Naert I, Jacobs R, Quirynen M. Influence of inflammatory reactions vs. Occlusal loading on peri-implant marginal bone level. Adv Dent Res 1999;13:130-135.
  • Sahin S, Cehreli MC, Yalcin E. The influence of functional forces on the biomechanics of implant-supported prostheses--a review. J Dent 2002;30(7-8):271-282.
  • Isidor F. Loss of osseointegration caused by occlusal load of oral implants. A clinical and radiographic study in monkeys. Clin Oral Implants Res 1996;7(2):143-152.
  • Isidor F. Histological evaluation of peri-implant bone at implants subjected to occlusal overload or plaque accumulation. Clin Oral Implants Res 1997;8(1):1-9.
  • Isidor F. Clinical probing and radiographic assessment in relation to the histologic bone level at oral implants in monkeys. Clin Oral Implants Res 1997;8(4):255-264.
  • Isidor F. Mobility assessment with the periotest system in relation to histologic findings of oral implants. Int J Oral Maxillofac Implants 1998;13(3):377-383.
  • Benaissa Alia, El Bahri Ould Chikha, Hadj Miloud Meddaha, Ali Merdjib, Bel abbes Bachir Bouiadjra. Effects of overloading in mastication on the mechanical behaviour of dental implants. Materials and Design 2013;47(1):210-217.
  • Isidor F. Influence of forces on peri-implant bone. Clin Oral Implants Res 2006;17 (Suppl 2):8-18.
  • Chang M, Chronopoulos V, Mattheos N. Impact of excessive occlusal load on successfully-osseointegrated dental implants: A literature review. J Investig Clin Dent 2013;4(3):142-150.
  • Naert I, Duyck J, Vandamme K. Occlusal overload and bone/implant loss. Clin Oral Implants Res 2012;23 (Suppl 6):95-107.
  • Barbier L, Schepers E. Adaptive bone remodeling around oral implants under axial and nonaxial loading conditions in the dog mandible. Int J Oral Maxillofac Implants 1997;12(2):215-223.
  • Heitz-Mayfield LJ, Schmid B, Weigel C, Gerber S, Bosshardt DD, Jonsson J, Lang NP, Jonsson J. Does excessive occlusal load affect osseointegration? An experimental study in the dog. Clin Oral Implants Res 2004;15(3):259-268.
  • Miyata T, Kobayashi Y, Araki H, Ohto T, Shin K. The influence of controlled occlusal overload on peri-implant tissue. Part 3: A histologic study in monkeys. Int J Oral Maxillofac Implants 2000;15(3):425-431.
  • Norton MR, Ferber C. The nonresilient hybrid removable prosthesis: Treatment of choice for the atrophic maxilla. Int J Periodontics Restorative Dent 1999;19(2):189-197.
  • Fu JH, Hsu YT, Wang HL. Identifying occlusal overload and how to deal with it to avoid marginal bone loss around implants. Eur J Oral Implantol 2012;5 Suppl:S91-103.
  • Jivraj S, Chee W, Corrado P. Treatment planning of the edentulous maxilla. Br Dent J 2006;201(5):261-279; quiz 304.
  • Miyata T, Kobayashi Y, Araki H, Motomura Y, Shin K. The influence of controlled occlusal overload on peri-implant tissue: A histologic study in monkeys. Int J Oral Maxillofac Implants 1998;13(5):677-683.
  • Berglundh T AI, Lindhe J. Bone reactions to longstanding functional load at implants: An experimental study in dogs. J Clin Periodontol. 2005;32(9):925-932.
  • Drago C, Howell K. Concepts for designing and fabricating metal implant frameworks for hybrid implant prostheses. J Prosthodont 2012;21(5):413-424.
  • Small BW. Maxillary immediately loaded fixed hybrid prosthesis: A case report. Gen Dent 2009;57(1):10-13.
  • Agustin-Panadero R, Penarrocha-Oltra D, Gomar-Vercher S, Ferreiroa A, Penarrocha-Diago M. Implant-supported overdenture manufactured using cad/cam techniques to achieve horizontal path insertion between the primary and secondary structure: A clinical case report. J Adv Prosthodont 2015;7(3):264-270.
  • Sola-Ruiz MF, Agustin-Panadero R, Fons-Font A, Labaig-Rueda C. An implant-supported overdenture design with a horizontal path of insertion. J Prosthet Dent 2013;110(4):239-242.
Year 2016, Volume: 50 Issue: 3, 57 - 61, 03.10.2016
https://doi.org/10.17096/jiufd.57173

Abstract

References

  • van Steenberghe D, Naert I, Jacobs R, Quirynen M. Influence of inflammatory reactions vs. Occlusal loading on peri-implant marginal bone level. Adv Dent Res 1999;13:130-135.
  • Sahin S, Cehreli MC, Yalcin E. The influence of functional forces on the biomechanics of implant-supported prostheses--a review. J Dent 2002;30(7-8):271-282.
  • Isidor F. Loss of osseointegration caused by occlusal load of oral implants. A clinical and radiographic study in monkeys. Clin Oral Implants Res 1996;7(2):143-152.
  • Isidor F. Histological evaluation of peri-implant bone at implants subjected to occlusal overload or plaque accumulation. Clin Oral Implants Res 1997;8(1):1-9.
  • Isidor F. Clinical probing and radiographic assessment in relation to the histologic bone level at oral implants in monkeys. Clin Oral Implants Res 1997;8(4):255-264.
  • Isidor F. Mobility assessment with the periotest system in relation to histologic findings of oral implants. Int J Oral Maxillofac Implants 1998;13(3):377-383.
  • Benaissa Alia, El Bahri Ould Chikha, Hadj Miloud Meddaha, Ali Merdjib, Bel abbes Bachir Bouiadjra. Effects of overloading in mastication on the mechanical behaviour of dental implants. Materials and Design 2013;47(1):210-217.
  • Isidor F. Influence of forces on peri-implant bone. Clin Oral Implants Res 2006;17 (Suppl 2):8-18.
  • Chang M, Chronopoulos V, Mattheos N. Impact of excessive occlusal load on successfully-osseointegrated dental implants: A literature review. J Investig Clin Dent 2013;4(3):142-150.
  • Naert I, Duyck J, Vandamme K. Occlusal overload and bone/implant loss. Clin Oral Implants Res 2012;23 (Suppl 6):95-107.
  • Barbier L, Schepers E. Adaptive bone remodeling around oral implants under axial and nonaxial loading conditions in the dog mandible. Int J Oral Maxillofac Implants 1997;12(2):215-223.
  • Heitz-Mayfield LJ, Schmid B, Weigel C, Gerber S, Bosshardt DD, Jonsson J, Lang NP, Jonsson J. Does excessive occlusal load affect osseointegration? An experimental study in the dog. Clin Oral Implants Res 2004;15(3):259-268.
  • Miyata T, Kobayashi Y, Araki H, Ohto T, Shin K. The influence of controlled occlusal overload on peri-implant tissue. Part 3: A histologic study in monkeys. Int J Oral Maxillofac Implants 2000;15(3):425-431.
  • Norton MR, Ferber C. The nonresilient hybrid removable prosthesis: Treatment of choice for the atrophic maxilla. Int J Periodontics Restorative Dent 1999;19(2):189-197.
  • Fu JH, Hsu YT, Wang HL. Identifying occlusal overload and how to deal with it to avoid marginal bone loss around implants. Eur J Oral Implantol 2012;5 Suppl:S91-103.
  • Jivraj S, Chee W, Corrado P. Treatment planning of the edentulous maxilla. Br Dent J 2006;201(5):261-279; quiz 304.
  • Miyata T, Kobayashi Y, Araki H, Motomura Y, Shin K. The influence of controlled occlusal overload on peri-implant tissue: A histologic study in monkeys. Int J Oral Maxillofac Implants 1998;13(5):677-683.
  • Berglundh T AI, Lindhe J. Bone reactions to longstanding functional load at implants: An experimental study in dogs. J Clin Periodontol. 2005;32(9):925-932.
  • Drago C, Howell K. Concepts for designing and fabricating metal implant frameworks for hybrid implant prostheses. J Prosthodont 2012;21(5):413-424.
  • Small BW. Maxillary immediately loaded fixed hybrid prosthesis: A case report. Gen Dent 2009;57(1):10-13.
  • Agustin-Panadero R, Penarrocha-Oltra D, Gomar-Vercher S, Ferreiroa A, Penarrocha-Diago M. Implant-supported overdenture manufactured using cad/cam techniques to achieve horizontal path insertion between the primary and secondary structure: A clinical case report. J Adv Prosthodont 2015;7(3):264-270.
  • Sola-Ruiz MF, Agustin-Panadero R, Fons-Font A, Labaig-Rueda C. An implant-supported overdenture design with a horizontal path of insertion. J Prosthet Dent 2013;110(4):239-242.
There are 22 citations in total.

Details

Journal Section Case Reports
Authors

Bebek Serra Oğuz Ahmet

Gülsüm Sayın Özel This is me

Hilal Uslu Toygar

Publication Date October 3, 2016
Published in Issue Year 2016 Volume: 50 Issue: 3

Cite

APA Oğuz Ahmet, B. S., Sayın Özel, G., & Uslu Toygar, H. (2016). FABRICATION OF A SCREW-RETAINED HYBRID PROSTHESIS FOLLOWING TREATMENT OF PERI-IMPLANT DEFECTS: A CASE REPORT. Journal of Istanbul University Faculty of Dentistry, 50(3), 57-61. https://doi.org/10.17096/jiufd.57173
AMA Oğuz Ahmet BS, Sayın Özel G, Uslu Toygar H. FABRICATION OF A SCREW-RETAINED HYBRID PROSTHESIS FOLLOWING TREATMENT OF PERI-IMPLANT DEFECTS: A CASE REPORT. J Istanbul Univ Fac Dent. October 2016;50(3):57-61. doi:10.17096/jiufd.57173
Chicago Oğuz Ahmet, Bebek Serra, Gülsüm Sayın Özel, and Hilal Uslu Toygar. “FABRICATION OF A SCREW-RETAINED HYBRID PROSTHESIS FOLLOWING TREATMENT OF PERI-IMPLANT DEFECTS: A CASE REPORT”. Journal of Istanbul University Faculty of Dentistry 50, no. 3 (October 2016): 57-61. https://doi.org/10.17096/jiufd.57173.
EndNote Oğuz Ahmet BS, Sayın Özel G, Uslu Toygar H (October 1, 2016) FABRICATION OF A SCREW-RETAINED HYBRID PROSTHESIS FOLLOWING TREATMENT OF PERI-IMPLANT DEFECTS: A CASE REPORT. Journal of Istanbul University Faculty of Dentistry 50 3 57–61.
IEEE B. S. Oğuz Ahmet, G. Sayın Özel, and H. Uslu Toygar, “FABRICATION OF A SCREW-RETAINED HYBRID PROSTHESIS FOLLOWING TREATMENT OF PERI-IMPLANT DEFECTS: A CASE REPORT”, J Istanbul Univ Fac Dent, vol. 50, no. 3, pp. 57–61, 2016, doi: 10.17096/jiufd.57173.
ISNAD Oğuz Ahmet, Bebek Serra et al. “FABRICATION OF A SCREW-RETAINED HYBRID PROSTHESIS FOLLOWING TREATMENT OF PERI-IMPLANT DEFECTS: A CASE REPORT”. Journal of Istanbul University Faculty of Dentistry 50/3 (October 2016), 57-61. https://doi.org/10.17096/jiufd.57173.
JAMA Oğuz Ahmet BS, Sayın Özel G, Uslu Toygar H. FABRICATION OF A SCREW-RETAINED HYBRID PROSTHESIS FOLLOWING TREATMENT OF PERI-IMPLANT DEFECTS: A CASE REPORT. J Istanbul Univ Fac Dent. 2016;50:57–61.
MLA Oğuz Ahmet, Bebek Serra et al. “FABRICATION OF A SCREW-RETAINED HYBRID PROSTHESIS FOLLOWING TREATMENT OF PERI-IMPLANT DEFECTS: A CASE REPORT”. Journal of Istanbul University Faculty of Dentistry, vol. 50, no. 3, 2016, pp. 57-61, doi:10.17096/jiufd.57173.
Vancouver Oğuz Ahmet BS, Sayın Özel G, Uslu Toygar H. FABRICATION OF A SCREW-RETAINED HYBRID PROSTHESIS FOLLOWING TREATMENT OF PERI-IMPLANT DEFECTS: A CASE REPORT. J Istanbul Univ Fac Dent. 2016;50(3):57-61.