Araştırma Makalesi
BibTex RIS Kaynak Göster

BURÇ, CONTA VE RULMAN UYGULAMALARI İÇİN SAF POLİ-TETRA-FLOR-ETİLEN VE BRONZ TAKVİYELİ POLİ-TETRA-FLOR-ETİLEN KOMPOZİTİN TRİBOLOJİK PERFORMANSLARININ KARŞILAŞTIRILMASI

Yıl 2024, Cilt: 11 Sayı: 22, 136 - 147, 30.04.2024
https://doi.org/10.54365/adyumbd.1395652

Öz

Bu çalışmada, endüstrinin çeşitli sektörlerinde makinelerde sıkça kullanılan hidrolik piston contaları, salmastra ve keçeler gibi polimerlerden üretilen malzemelerin tribolojik performansları incelenmiştir. Tribolojik çalışmada saf poli-tetra-flor-etilen (PTFE) polimeri ile ağırlık olarak %25 oranında bronz takviyeli poli-tetra-flor-etilen (PTFE/25bronz) kompozit kullanılmış ve her iki malzemenin tribolojik performansları karşılaştırılmıştır. Tribojik deneyler disk üzerinde pim olacak şekilde dizayn edilmiş aşınma cihazında gerçekleştirilmiştir. Tribolojik deneyler 30N-150N yük aralığında ve 1.0 m/s kayma hızında yapılmıştır. Deneylerde sürtünme katsayısı, aşınma hacmi, pim/disk yüzey sıcaklıkları ve spesifik aşınma oranı ölçülmüştür. Çalışma sonucunda PTFE/25 bronze kompozitin sürtünme katsayısı, pim/disk yüzey sıcaklığı ve aşınma oranı saf PTFE’ye daha düşük olduğu tespit edilmiştir. PTFE polimerine %25 bronz ilavesi kompozitin spesifik aşınma oranında önemli oranda azalmaya sebep olmuştur. Taramalı elektron mikroskobu ve optik mikroskop kullanılarak numunelerin aşınma yüzey mikroyapı incelemeleri gerçekleştirilmiştir. Saf PTFE polimerinde abrazif aşınma, PTFE/bronz kompozitinde ise adhezif aşınma mekanizması gözlenmiştir.

Teşekkür

Bu çalışma Sakarya Uygulamalı Bilimler Üniversitesi, Bilimsel Araştırma Projeleri kapsamında 008-2020 proje no ile desteklenmiş olup Yazarlar ilgili Kuruma teşekkür eder.

Kaynakça

  • Burkarter E, Saul CK, Thomazi F, Cruz NC, Roman LS, Schreiner WH. Superhydrophobic electrosprayed PTFE. Surface and Coatings Technology 2007; 202(1): 194–198.
  • Pansare PD, Bajaj DS, Aher VS. Tribological behavior of PTFE composite materıal for journal bearing. Novateur Publication’s, International Journal of Innovation in Engineering, Research and Technology (IJIERT), Icıtdceme’15 Conference Proceedings 2015; 1-5.
  • Jadhav MB, Abhang LB. Tribological investigation of PTFE filled composite with varying percentage of MoS2 in bearing application. International Journal of Advanced Research in Science & Technology (IJARST) 2020; 20(3): 20-34.
  • Yuan XD, Yang XJ. A study on friction and wear properties of PTFE coatings under vacuum conditions. Wear 2010; 269: 291–297.
  • Ye S, Zeng X. Tribological properties of PTFE and PTFE composites at different temperatures. Tribology Transactions 2014; 57(3): 382-386.
  • Yavuz K. Role of reinforcement materials on mechanical and tribological properties of PTFE composites. Polymer Korea 2020; 44(4): 436-444.
  • Xia Z, Wedel A, Danz R. Charge storage and its dynamics in porous polytetrafluoroethylene (PTFE) film electrets. IEEE Transactions on Dielectrics and Electrical Insulation 2003; 10: 102–108.
  • Mohammad JK, Wani MF, Rajat G. Tribological properties of bronze filled PTFE under dry sliding conditions and aqueous environments (distilled water and sea water). International Journal of Surface Science and Engineering 2018; 12(5/6): 348-364.
  • Tatyana SS, Andrey PV, Aitalina AO, Sakhayana ND, Aleksey GA. Mechanical and tribological properties of polytetrafluoroethylene composites modified by carbon fibers and zeolite. Lubricants 2022; 10: 4.
  • Zhen J, Han Y, Wang H, Jiang Z, Wang L, Huang Y, Jia Z, Zhang R. High temperature friction and wear behavior of PTFE/MoS2 composites. Lubricants 2023; 11: 312.
  • Daspute D, Randhavan BM. The tribologıcal properties of ptfe composite fılled with carbon fıber, MoS2, bronze reinforcement. International Research Journal of Engineering and Technology (IRJET) 2023; 10(5): 1697-1601.
  • Avinash BA, Nimbalkar SR, Kharde RR, Mhaske MS, Tribological investigation of bronze filled PTFE composite material for journal bearing application. International Journal of Advance Research and Innovative Ideas in Education 2016; 2(5): 584-589.
  • Khan MJ, Wani MF, Rajat G. Tribological properties of glass fiber filled polytetrafluoroethylene sliding against stainless steel under dry and aqueous environments: enhanced tribological performance in sea water. Materials Research Express 2018; 5: 055309.
  • Pathan F, Hemant G, Sonam G. Optimization for tribological properties of glass fiber-reinforced PTFE composites with grey relational analysis. Journal of Materials 2016; 8981746.
  • Şahin Y, Mirzayev H. Wear characteristics of polymer-based composites. Mechanics of Composite Materials 2015; 51(5): 543-554.
  • Raaj KRA, Sriram S, Harikiran RR, Yenugadhati PD. Experimental investigation on influence of molybdenum content on tribological properties of hybrid PTFE composite. Emerging Trends in Mechanical Engineering, AIP Conf. Proc. 2018; 2080: 020017-1–020017-7.
  • Vaibhav VN, Bhuibhar AG, Sonwane SA, Raka VB. Tribological behaviour of PTFE and its composites. Journal of Advances in Science and Technology 2017; 13(01): 259-266. [18] Amenta F, Bolelli G, Pedrazzi S, Allesina G, Santeramo F, Bertarini A, Sassatelli P, Lusvarghi L. Sliding wear behaviour of fibre-reinforced PTFE composites against coated and uncoated steel. Wear 2021; 486–487: 204097.
  • Tanaka K, Kawakami S. Effect of various fillers on the friction and wear of polytetrafluoroethylene-based composites. Wear 1982; 79: 221–234.
  • Maria R, Kim B, Fredrik F, Ilia R, Jens H. Influence of counter surface roughness and lay on the tribological behaviour of self-lubricating bearing materials in dry sliding conditions at high contact pressures. Lubricants 2022; 10: 167.
  • Zeynep P, Shahrad S, Vedat T. The effect of counter-face roughness on the tribological behavior of filled and unfilled PTFE. Journal of Mechanics Engineering and Automation 2015; 5: 609-615.
  • Menezes, PL, Kishore, Kailas, SV. Influence of surface texture and roughness parameters on friction and transfer layer formation during sliding of aluminum pin on steel plate. Wear 2009; 267: 1534-49.
  • Lloyd AIG, Noel REJ. The effect of counterface surface roughness on the wear of UHMWPE in water and oil-in-water emulsion. Tribology International 1988; 21: 83–88.
  • Golchin A, Friedrich K, Noll A, Prakash B. Influence of counter surface topography on the tribological Behaviour of carbon-filled PPS composites in water. Tribology International 2015; 88: 209–217.
  • Quaglini V, Dubini P, Ferroni D, Poggi C. Influence of counterface roughness on friction properties of engineering plastics for bearing applications. Materials and Design 2009; 30: 1650–1658.
  • Zsidai L, de Baets P, Samyn P, Kalacska G, van Parys AP. The tribological behaviour of engineering plastics during sliding friction investigated with small-scale specimens. Wear 2002; 253: 673–688. [27] Giltrow JP, Lancaster JK. The role of the counterface in the friction and wear of carbon fibre reinforced thermosetting resins. Wear 1970; 16: 359–374.
  • Song J, Liu X, Zhao G, Ding Q, Qiu J. Effect of surface roughness and reciprocating time on the tribological properties of the polyimide composites. Polymer Engineering and Science 2019; 59: 483–489.
  • Federica A, Giovanni Bolelli, D’Errico F, Filippo O, Simone P, Giulio A, Alessandro B, Pietro P, Luca L. Tribological behaviour of PTFE composites: Interplay between reinforcement type and counterface material. Wear 2022; 510-511: 204498.

COMPARISON OF TRIBOLOGICAL PERFORMANCES OF PURE POLY-TETRA-FLUORO-ETHYLENE AND BRONZE REINFORCED POLY-TETRA-FLUORO-ETHYLENE COMPOSITE FOR BUSHING, GASKET AND BEARING APPLICATIONS

Yıl 2024, Cilt: 11 Sayı: 22, 136 - 147, 30.04.2024
https://doi.org/10.54365/adyumbd.1395652

Öz

In this study, the tribological performances of materials produced from polymers such as hydraulic piston seals, glands and seals, which are frequently used in machines in various sectors of the industry, were investigated. In the tribological study, pure poly-tetra-fluoro-ethylene (PTFE) and 25wt.% bronze reinforced poly-tetra-fluoro-ethylene (PTFE/25bronze) were used and the tribological performances of both materials were compared. Tribological tests were realised on a pin-on-disc wear test rig. Tribological experiments were performed in the load range of 30N-150N and sliding speed of 1.0 m/s. Friction coefficient (µ), wear volume, pin/disk surface temperatures and specific wear rate (SWR) were measured. As a result, it was observed that the µ, pin/disc surface temperature and SWR of PTFE/25bronze composite were lower than pure PTFE. The addition of 25wt.% bronze to the PTFE caused a significant reduction in the SWR of the composite. Optical and scanning electron microscopy were used to examine the wear surface microstructure of the samples. Abrasive wear mechanism was observed in pure PTFE and adhesive wear mechanism in PTFE/bronze composite.

Kaynakça

  • Burkarter E, Saul CK, Thomazi F, Cruz NC, Roman LS, Schreiner WH. Superhydrophobic electrosprayed PTFE. Surface and Coatings Technology 2007; 202(1): 194–198.
  • Pansare PD, Bajaj DS, Aher VS. Tribological behavior of PTFE composite materıal for journal bearing. Novateur Publication’s, International Journal of Innovation in Engineering, Research and Technology (IJIERT), Icıtdceme’15 Conference Proceedings 2015; 1-5.
  • Jadhav MB, Abhang LB. Tribological investigation of PTFE filled composite with varying percentage of MoS2 in bearing application. International Journal of Advanced Research in Science & Technology (IJARST) 2020; 20(3): 20-34.
  • Yuan XD, Yang XJ. A study on friction and wear properties of PTFE coatings under vacuum conditions. Wear 2010; 269: 291–297.
  • Ye S, Zeng X. Tribological properties of PTFE and PTFE composites at different temperatures. Tribology Transactions 2014; 57(3): 382-386.
  • Yavuz K. Role of reinforcement materials on mechanical and tribological properties of PTFE composites. Polymer Korea 2020; 44(4): 436-444.
  • Xia Z, Wedel A, Danz R. Charge storage and its dynamics in porous polytetrafluoroethylene (PTFE) film electrets. IEEE Transactions on Dielectrics and Electrical Insulation 2003; 10: 102–108.
  • Mohammad JK, Wani MF, Rajat G. Tribological properties of bronze filled PTFE under dry sliding conditions and aqueous environments (distilled water and sea water). International Journal of Surface Science and Engineering 2018; 12(5/6): 348-364.
  • Tatyana SS, Andrey PV, Aitalina AO, Sakhayana ND, Aleksey GA. Mechanical and tribological properties of polytetrafluoroethylene composites modified by carbon fibers and zeolite. Lubricants 2022; 10: 4.
  • Zhen J, Han Y, Wang H, Jiang Z, Wang L, Huang Y, Jia Z, Zhang R. High temperature friction and wear behavior of PTFE/MoS2 composites. Lubricants 2023; 11: 312.
  • Daspute D, Randhavan BM. The tribologıcal properties of ptfe composite fılled with carbon fıber, MoS2, bronze reinforcement. International Research Journal of Engineering and Technology (IRJET) 2023; 10(5): 1697-1601.
  • Avinash BA, Nimbalkar SR, Kharde RR, Mhaske MS, Tribological investigation of bronze filled PTFE composite material for journal bearing application. International Journal of Advance Research and Innovative Ideas in Education 2016; 2(5): 584-589.
  • Khan MJ, Wani MF, Rajat G. Tribological properties of glass fiber filled polytetrafluoroethylene sliding against stainless steel under dry and aqueous environments: enhanced tribological performance in sea water. Materials Research Express 2018; 5: 055309.
  • Pathan F, Hemant G, Sonam G. Optimization for tribological properties of glass fiber-reinforced PTFE composites with grey relational analysis. Journal of Materials 2016; 8981746.
  • Şahin Y, Mirzayev H. Wear characteristics of polymer-based composites. Mechanics of Composite Materials 2015; 51(5): 543-554.
  • Raaj KRA, Sriram S, Harikiran RR, Yenugadhati PD. Experimental investigation on influence of molybdenum content on tribological properties of hybrid PTFE composite. Emerging Trends in Mechanical Engineering, AIP Conf. Proc. 2018; 2080: 020017-1–020017-7.
  • Vaibhav VN, Bhuibhar AG, Sonwane SA, Raka VB. Tribological behaviour of PTFE and its composites. Journal of Advances in Science and Technology 2017; 13(01): 259-266. [18] Amenta F, Bolelli G, Pedrazzi S, Allesina G, Santeramo F, Bertarini A, Sassatelli P, Lusvarghi L. Sliding wear behaviour of fibre-reinforced PTFE composites against coated and uncoated steel. Wear 2021; 486–487: 204097.
  • Tanaka K, Kawakami S. Effect of various fillers on the friction and wear of polytetrafluoroethylene-based composites. Wear 1982; 79: 221–234.
  • Maria R, Kim B, Fredrik F, Ilia R, Jens H. Influence of counter surface roughness and lay on the tribological behaviour of self-lubricating bearing materials in dry sliding conditions at high contact pressures. Lubricants 2022; 10: 167.
  • Zeynep P, Shahrad S, Vedat T. The effect of counter-face roughness on the tribological behavior of filled and unfilled PTFE. Journal of Mechanics Engineering and Automation 2015; 5: 609-615.
  • Menezes, PL, Kishore, Kailas, SV. Influence of surface texture and roughness parameters on friction and transfer layer formation during sliding of aluminum pin on steel plate. Wear 2009; 267: 1534-49.
  • Lloyd AIG, Noel REJ. The effect of counterface surface roughness on the wear of UHMWPE in water and oil-in-water emulsion. Tribology International 1988; 21: 83–88.
  • Golchin A, Friedrich K, Noll A, Prakash B. Influence of counter surface topography on the tribological Behaviour of carbon-filled PPS composites in water. Tribology International 2015; 88: 209–217.
  • Quaglini V, Dubini P, Ferroni D, Poggi C. Influence of counterface roughness on friction properties of engineering plastics for bearing applications. Materials and Design 2009; 30: 1650–1658.
  • Zsidai L, de Baets P, Samyn P, Kalacska G, van Parys AP. The tribological behaviour of engineering plastics during sliding friction investigated with small-scale specimens. Wear 2002; 253: 673–688. [27] Giltrow JP, Lancaster JK. The role of the counterface in the friction and wear of carbon fibre reinforced thermosetting resins. Wear 1970; 16: 359–374.
  • Song J, Liu X, Zhao G, Ding Q, Qiu J. Effect of surface roughness and reciprocating time on the tribological properties of the polyimide composites. Polymer Engineering and Science 2019; 59: 483–489.
  • Federica A, Giovanni Bolelli, D’Errico F, Filippo O, Simone P, Giulio A, Alessandro B, Pietro P, Luca L. Tribological behaviour of PTFE composites: Interplay between reinforcement type and counterface material. Wear 2022; 510-511: 204498.
Toplam 27 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Konular Triboloji
Bölüm Makaleler
Yazarlar

Ahmet Maslavi 0000-0002-9571-0640

Hüseyin Ünal 0000-0003-0521-6647

Salih Hakan Yetgin 0000-0002-6068-9204

Yayımlanma Tarihi 30 Nisan 2024
Gönderilme Tarihi 24 Kasım 2023
Kabul Tarihi 29 Nisan 2024
Yayımlandığı Sayı Yıl 2024 Cilt: 11 Sayı: 22

Kaynak Göster

APA Maslavi, A., Ünal, H., & Yetgin, S. H. (2024). BURÇ, CONTA VE RULMAN UYGULAMALARI İÇİN SAF POLİ-TETRA-FLOR-ETİLEN VE BRONZ TAKVİYELİ POLİ-TETRA-FLOR-ETİLEN KOMPOZİTİN TRİBOLOJİK PERFORMANSLARININ KARŞILAŞTIRILMASI. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi, 11(22), 136-147. https://doi.org/10.54365/adyumbd.1395652
AMA Maslavi A, Ünal H, Yetgin SH. BURÇ, CONTA VE RULMAN UYGULAMALARI İÇİN SAF POLİ-TETRA-FLOR-ETİLEN VE BRONZ TAKVİYELİ POLİ-TETRA-FLOR-ETİLEN KOMPOZİTİN TRİBOLOJİK PERFORMANSLARININ KARŞILAŞTIRILMASI. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi. Nisan 2024;11(22):136-147. doi:10.54365/adyumbd.1395652
Chicago Maslavi, Ahmet, Hüseyin Ünal, ve Salih Hakan Yetgin. “BURÇ, CONTA VE RULMAN UYGULAMALARI İÇİN SAF POLİ-TETRA-FLOR-ETİLEN VE BRONZ TAKVİYELİ POLİ-TETRA-FLOR-ETİLEN KOMPOZİTİN TRİBOLOJİK PERFORMANSLARININ KARŞILAŞTIRILMASI”. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi 11, sy. 22 (Nisan 2024): 136-47. https://doi.org/10.54365/adyumbd.1395652.
EndNote Maslavi A, Ünal H, Yetgin SH (01 Nisan 2024) BURÇ, CONTA VE RULMAN UYGULAMALARI İÇİN SAF POLİ-TETRA-FLOR-ETİLEN VE BRONZ TAKVİYELİ POLİ-TETRA-FLOR-ETİLEN KOMPOZİTİN TRİBOLOJİK PERFORMANSLARININ KARŞILAŞTIRILMASI. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi 11 22 136–147.
IEEE A. Maslavi, H. Ünal, ve S. H. Yetgin, “BURÇ, CONTA VE RULMAN UYGULAMALARI İÇİN SAF POLİ-TETRA-FLOR-ETİLEN VE BRONZ TAKVİYELİ POLİ-TETRA-FLOR-ETİLEN KOMPOZİTİN TRİBOLOJİK PERFORMANSLARININ KARŞILAŞTIRILMASI”, Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi, c. 11, sy. 22, ss. 136–147, 2024, doi: 10.54365/adyumbd.1395652.
ISNAD Maslavi, Ahmet vd. “BURÇ, CONTA VE RULMAN UYGULAMALARI İÇİN SAF POLİ-TETRA-FLOR-ETİLEN VE BRONZ TAKVİYELİ POLİ-TETRA-FLOR-ETİLEN KOMPOZİTİN TRİBOLOJİK PERFORMANSLARININ KARŞILAŞTIRILMASI”. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi 11/22 (Nisan 2024), 136-147. https://doi.org/10.54365/adyumbd.1395652.
JAMA Maslavi A, Ünal H, Yetgin SH. BURÇ, CONTA VE RULMAN UYGULAMALARI İÇİN SAF POLİ-TETRA-FLOR-ETİLEN VE BRONZ TAKVİYELİ POLİ-TETRA-FLOR-ETİLEN KOMPOZİTİN TRİBOLOJİK PERFORMANSLARININ KARŞILAŞTIRILMASI. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi. 2024;11:136–147.
MLA Maslavi, Ahmet vd. “BURÇ, CONTA VE RULMAN UYGULAMALARI İÇİN SAF POLİ-TETRA-FLOR-ETİLEN VE BRONZ TAKVİYELİ POLİ-TETRA-FLOR-ETİLEN KOMPOZİTİN TRİBOLOJİK PERFORMANSLARININ KARŞILAŞTIRILMASI”. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi, c. 11, sy. 22, 2024, ss. 136-47, doi:10.54365/adyumbd.1395652.
Vancouver Maslavi A, Ünal H, Yetgin SH. BURÇ, CONTA VE RULMAN UYGULAMALARI İÇİN SAF POLİ-TETRA-FLOR-ETİLEN VE BRONZ TAKVİYELİ POLİ-TETRA-FLOR-ETİLEN KOMPOZİTİN TRİBOLOJİK PERFORMANSLARININ KARŞILAŞTIRILMASI. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi. 2024;11(22):136-47.